Article 1 № 1'2023

01_Ageev, Volkov_PDF

© Volodymyr Ageev, Candidate of Technical Sciences, Head of the Research Center – Technical Service for Vehicle Testing, ORCID:0000-0002-5701-2518, e-mail:;
© Oleksandr Volkov, Candidate of Technical Sciences, Head of the Department of Regulatory Support and Quality Management of the Testing Center, ORCID: 0000-0003-4863-3643, e-mail:
SE “State Road Transport Research Institute”

Practical aspects of implementation of management systems according to the requirements. DOI: 10.33868/0365-8392-2022-1-273-2-7

Abstract. The practical aspects of the establishment of conformity assessment bodies (OOV) on the basis of SE “DerzhautotransNDIproject” (SRTRI) are described, which are accredited for compliance with the requirements of DSTU EN ISO/IEC 17020, DSTU EN ISO/IEC 17025, use unified documents of management systems, have developed and implemented scientific developments that provide an opportunity to ensure the application in the activities of the OOV:
– methods and programs for automated selection and justification of inter-calibration intervals of measuring equipment and test equipment with measuring functions;
– the widest range of rules, correctly substantiated by certain calculations, regarding the decision on whether the object of evaluation meets the established requirements;
– methods for practical calculation of measurement uncertainty under any conditions (one-time measure-ment, lack of part of necessary input data, etc.).
Keywords: accreditation, certificate of accreditation, testing, testing laboratory (TL), testing center of wheeled vehicles (TC KTZ), inspection, National Accreditation Agency of Ukraine (NAAU), inspection body (IO), con-formity assessment body (OOV), state technical inspection, wheeled vehicles (KTZ), management system (SM).

1. Verkhovna Rada of Ukraine. (1993). Law of Ukraine «On Road Traffic» No 3353-XII. Retrieved from
2. Cabinet of Ministers of Ukraine. (2007). Resolution «On Some Issues of Reforming the System of State Technical Inspection of Wheeled Vehicles» No 1036. Retrieved from
3. United Nation. (1997). Agreement on the Adoption of Uniform Conditions for Periodic Technical Inspections of Wheeled Vehicles and on the Mutual Recognition of Such Inspections (Vienna, November 13, 1997). Аpproved by the Decree of the President of Ukraine of February 28, 2006 No 159/2006.
4. Technical Committee for Standardization «Conformity Assessment» (TC 89). (2019). DSTU EN ISO/IEC 17020:2019 (EN ISO/IEC 17020:2012, IDT; ISO/IEC 17020:2012, IDT) Conformity Assessment. Requirements for the Work of Different Types of Inspection Bodies. [in Ukrainian]
5. UkrNDNC. (2019). DSTU EN ISO/IEC 17025:2019 (EN ISO/IEC 17025:2017, IDT; ISO/IEC 17025:2017, IDT) General Requirements for the Competence of Testing and Calibration Laboratories. [in Ukrainian]
6. National standard of Ukraine. (2013). DSTU ІLАС-G 24/ОІМL D 10:2013 (ІLАС-G 24/ОІМL D 10:2010, IDТ). Guidelines for Determining between Calibration Intervals of Measuring Equipment.
7. Institute of Metrology. (2008). DSTU 6044:2008. Metrology. Inter-verification Interval of Measuring Instruments. Basic Provisions and Requirements for Installation.
8. State System for Ensuring the Uniformity of Measurements. (2004). RMG 74-2004 Methods of Determination of Verification and Calibration Intervals of Measuring Instruments.
9. Volkov, O. F., Volkov, R. O., Kolobov, K. S., Lesyk, O. S., Rychok, S. O. (2015). Rozrakhunok mizhkalibruval’nykh intervaliv zasobiv vymiryuval’noyi tekhniky [Calculation of calibration intervals for measuring instruments]. Kyiv, Avtos-?lyakhovyk Ukrayiny, 5, 11-13.
10. Redzyuk, A. M., Ageev, V. B., Ustymenko, V. S., Volkov, O. F., Kolobov, K. S., Lesyk, O. S., Rychok, S. O. etc. (2018). Vybir mizhkalibruval’noho intervalu [Selecting the calibration interval]. Kyiv, Avtos-?lyakhovyk Ukrayiny, 1, 2-7.
11. SE UkrNDNC. (2006). DSTU-N RMG 43:2006 Metrology. Application of the Guide to the Expression of Uncertainty of Measurement.
12. JCGM. (2008). JCGM100:2008, (GUM), Evaluation of measurement data – Guide to the Expression of Uncertainty in Measurement.
13. SE UkrNDNC. (2005). DSTU GOST ISO 5725-6:2005 Accuracy (Correctness and Precision) of Methods and Results of Measurements. Part 6. Use of Precision Values in Practice.
14. State System for Ensuring Uniformity of Meas-urements. (2004). R 50.2.038-2004 GSI. Measure-ments of Direct Single Measurements. Estimation of Errors and Uncertainty of Measurement Results.
15. Volkov, O. F., Naumenko, N. O. (2021). Methodology for Calculation of Measurement Uncertainty Based on ILAC-G8:09/2019 Recom-?endations. Materials of the All-Ukrainian Scientific and Practical Conference “Prospects for the Development of Road Transport and Infrastructure”, Kyiv, SE State Road Transport Research Institute, 62-70.
16. ILAC. (2019). ІLAC-G8:09/2019 Guidance on the Rules for Decision Making and Conclusions of Con-formity.
17. EA. (2015). EA-5/02 INF: 2015 EA Guidelines for the Application of ISO/IEC 17020 During Periodic Technical Control (Inspection) of Wheeled Vehicles and their Trailers for Serviceability.