View the article in PDF: Волков, Науменко
© Oleksandr Volkov, Ph.D., Assocaite Professor, Нead of Department of Regulatory Support and Quality Management of ТC (DSQ),
e-mail: ovolkov@insat.org.ua,
ORCID: 0000-0003-4863-3643;
© Nilа Naumenko, Deputy Head DSQ,
e-mail: nnaumenko@insat.org.ua,
ORCID: 0000-0002-3856-2645
(State Enterprise “State Road Transport Research Institute”)
METHOD OF CALCULATING UNCERTAINTY OF MEASUREMENT TAKING INTO ACCOUNT RECOMMENDATIONS ILAC-G8:09/2019
DOI: 10.33868/0365-8392-2021-4-268-62-70
Abstract. It is developed a methodology and software product for calculating measurement uncertainty, as well as rules for conformity assessment bodies on making decisions and conclusions concerning compliance of conformity assessment objects with the requirements stated by the regulation, which enables the conformity assessment bodies to perform necessary calculations of measurement uncertainty and eliminate problematic issues which arise during the conformity assessment due to disparity in the requirements of regulatory documents.
Keywords: measuring uncertainty, standard vagueness, total vagueness, extended vagueness, calculation, decision-making rule.
References
1. Conformity assessment — Requirements for the operation of various types of bodies performing inspection. DSTU EN ISO/IEC 17020:2019 (EN ISO/IEC 17020:2012, IDT; ISO/IEC 17020:2012,IDT). [Chynnyy vid 2021-01-01]. Kyiv: DP «UkrNDNTs», 2020. 14 s. Retrieved from http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=89192 .
2. General requirements for the competence of testing and calibration laboratories. DSTU EN ISO/IEC 17025:2019 (EN ISO/IEC 17025:2017, IDT; ISO/IEC 17025:2017, IDT). [Chynnyy vid 2021-01-01]. Kyiv: TOV Vydavnytstvo «Fort», 2020. 24 s. Retrieved from http://online.budstandart.com/ru/catalog/doc-page.html?id_doc=88724 .
3. UN Regulation № 13 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking. Retrieved from https://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/r013r6e.pdf .
4. UN Regulation № 48 Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signaling devices. Retrieved from https://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/R048r6r.pdf .
5. UN Regulation № 67 Uniform provisions concerning the approval of: I. Specific equipment of vehicles of category M and N using liquefied petroleum gases in their propulsion system II. Vehicles of category M and N fitted with specific equipment for the use of liquefied petroleum gases in their propulsion system with regard to the installation of such equipment. Retrieved from https://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/2014/R067r4e.pdf .
6. UN Regulation № 83 Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements. Retrieved from https://unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/R083r5e.pdf .
7. UN Regulation № 100 Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train. Retrieved from https://unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/2013/R100r2e.pdf .
8. STP 10-0401:2021 Systema upravlinnya yakistyu. Vyprobuvannya produktsiyi. DP «DerzhavtotransNDIproekt», 16 s.
9. Polityka NAAU shchodo prostezhuvanosti vymiryuvannya, shcho provodyat’ orhany z otsinky vidpovidnosti vidpovidno do zayavlenoyi sfery akredytatsiyi (red. 08 vid 27.12.2019 ZD-08.00.09), skhvalena i rekomendovana do zastosuvannya rishennyam Rady z akredytatsiyi NAAU vid 27.12.2019. Retrieved from https://naau.org.ua/polityka-naau-shhodo-prostezhuvanosti-vymiryuvannya-shho-provodyat-organy-z-otsinky-vidpovidnosti-vidpovidno-do-zayavlenoyi-sfery-akredytatsiyi .
10. ILAC P14:12/2010 – ILAC Policy for Uncertainty in Calibration. ILAC, 2010. 14 р. Retrieved from http://docplayer.net/95808616-Ilac-p14-12-2010-ilac-policy-for-uncertainty-in-calibration.html .
11. JCGM100:2008, (GUM), Evaluation of measurement data – Guide to the Expression of Uncertainty in Measurement. Propagation of distributions using a Monte Carlo method. JCGM, 2008. 90 p. Retrieved from https://ncc.nesdis.noaa.gov/documentation/ JCG._100_2008_E.pdf .
12. Metrology. Applying the «Guide to Expression of Uncertainty in Measurement». DSTU N RMG 43: 2006 (RMG 43: 2001,IDT). [Chynnyy z 2007–01–01]. – K.: DP «UkrNDNTs», 2007. – 27 s. – (Natsional’nyy standart Ukrayiny). Retrieved from https://www.dsns.gov.ua/files/2011/6/24/648.pdf.
13. Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values. DSTU GOST ISO 5725-6:2005. [Chynnyy z 2006–07–01]. – K.: Derzhspozhyvstandart, 2006. – 54 s. – (Natsional’nyy standart Ukrayiny). Retrieved from http://online.budstandart.com/ru/catalog/doc-page?id_doc=84938
14. R 50.2.038-2004 GSI Direct single measurements. Estimation of errors and uncertainty of measurements result. M.: Standartynform, 2011. – 11 s. Retrieved from https://docs.cntd.ru/document/1200037562 .
15. STP 06-0308:2021 Systema upravlinnya yakistyu. Metrolohiya. Vyrazhennya nevyznachenosti vymiryuvan’. DP «DerzhavtotransNDIproekt», 15 s.
16. ІLAC-G8:09/2019 Guidance on decision-making rules and conclusions of compliance. Pereklad na ukrayins’ku movu DP “UKRMETRTESTSTANDART”, 22 s. Retrieved from https://naau.org.ua/wp-content/uploads/2021/03/ILAC_G8_09_2019_Nast-anova-shhodo-pravy%60l-pry%60jnyattya-rishen%60.pdf.